MagPro 2 is a chip tunning system composed of several modules. Serial OBDII programming tool that allows the communication with a vast number of vehicles, allowing the reading and writing through the use of simple connections with simple and fast software.
Description: The interfaces supports CAN-bus (ISO 15765-4 & SAE-J2234), K-line (ISO 9141-2 & ISO 14230-4) and FORD SAE J1850PWM) protocols. X17 support also TP2.0 and UDS protocols.
In most cases (euro4 & 5 vehicles) crc correction is automatic.
Thanks to wide range of accessories you can read / write by the OBDII diagnostic connection or by the dock (using the BREAKBOX). For cars with non-diagnostic socket OBDII, you have the specific cables.
MAGPro2 offer injectors coding function for the cars of Renault, Nissan and PSA group (necessary after writing the modified file to ECU).
The sophisticated structure of the MAGPro 2 offers the advanced functions of software (RECOVERY MODE) ensure accuracy of communication with the ECUs.
Recently, Bentley sales and marketing responsible Kevin Rose in an foreign media interview said, Bentley EXP 10 Speed 6 concept car production green light is soon to open, and now only need the board of directors agreed. It is reported that the production version will based on MSB platform to build, its positioning in two-seat sports car.
According to Kevin Rose introduced the production version will based on MSB platform as the same as the new generation Porsche Panamera to build. He also mentioned that the next Continental GT, Flying Spur and other models are also from MSB platform.
In power, EXP 10 Speed 6 concept car production models may use a 4.0L V8 twin-turbo engine. The future is also likely to launch an electric version model, equipped with two electric motors, use four-wheel drive system, top speed can reach 321km/h, maximum mileage is about 500km.
In test, the Bentley EXP10 Speed 6 can use VAS 5054A to diagnosis all the system. VAS 5054A diagnostic tool used for VW group cars include VW,AUDI,SKODA,SEAT,Bentley and Lamborghini. The latest software is ODIS 2.2.4, with Bluetooth function and full chip OKI.
Recently, foreign media to capture a group of the latest Ford Mondeo road test spy photos, the new car mainly adjusted for the front face shape and tail details. It is reported that the car is expected to be released by the end of 2016.
The front face of the new Mondeo use the latest family front face design, the front grille is still multi-spoke chrome strip design, both side LED headlight inside integrated into LED daytime running light, the bottom grille of the front bumper is from the previous inverted trapezoidal design adjusted positive trapezoid style, both sides joined LED fog lights, style also becomes polygonal shape.
The rear styling, the new Mondeo has little change with the current model, but from the current camouflage style of the taillights center can see, the new car in future may be make fine adjustments for taillight group.
Power systems, the new Mondeo is expected to continue to equipped with 1.5T and 2.0T engines.Transmission system may be will match with six-speed automatic gearbox. In test can use ford vcm 2 to diagnosis all the system. VCM II Scanner is a dealer lever diagnostic tool for Ford by using IDS software.It has more advantages than old Ford VCM scanner.