auto scanner tool - Professional Auto Diagnostic Tools Supplier.
autoscannertool by autoscannertool @
In the 2015 Los Angeles Auto Show, Nissan launched JUKE Stinger special edition model, the car uses black and yellow mix color, very personality.

This special edition model is Nissan mainly launched for promote Color Studio personalized project, Stinger Special Edition has two colors, which one is that we have seen, mainly use black, in some body details use yellow trim. the interior also use black and yellow color.
While the other model use yellow car body, in wheels, wheel arches and front bumper use black trim, opposite with this car's color.
It is reported that this customized service need only pay $ 990, you can have private and customized color in the 8 kinds among 12 kinds, in addition JUKE, this service is also can used on more models, such as Tiida (Versa) and other models.
In test, the JUKE Stinger Special Edition can still use newest Nissan diagnostic tool NISSAN CONSULT3 PLUS to diagnosis all the system. It is based on a wireless platform provides completed diagnosis and service information with all Nissan Consult 3 & 2 functions .
More related topics
Audi TT RS latest renderings exposure released in 2016
Renault Kadjar will debut in Guangzhou Motor Show
Los Angeles Auto Show: Ford F-Series pickup Super Duty
autoscannertool by autoscannertool @
LAUNCH X431 Idiag Auto Diag Scanner For Apple IOS works with Apple device which is in IOS system. Its covers more than 70 brands of cars include US, EU and Asian. The Bluetooth function of X431 Idiag Auto Diag For IOS makes it to be convenience in diagnosing. Function includes Read/Clear DTC, Reading Data Sream and other special functions.

 Please note:
1.X431 Idiag Auto Diag works with IOS 5.0 and higher.
2.This is original LAUNCH X431 Idiag Auto Diag for Apple IOS comes with two basic software Demo and OBDII. You have to go to official website to register and download vehicle diagnostic software.
Functions of LAUNCH X431 Idiag Auto Diag Scanner For Apple IOS:
1. Vehicle full system diagnosing.
2. Reading system version information.
3. Read DTCs & Clear DTCs.
4. Reading data stream.
5. Data stream displayed in curves.
6. Actuation Test.
7. Special function.
8. Instant information and software upgrade reminding.
9. Maintenance community to share technical experience.
10. Maintenance data base contains maintenance data and maintenance case online sharing.
11. Strong data base support and online service supply.
More related topics
Mercedes AMG SLC-class equipped with 3.0T engine released in January 2016
Fiat 500X two concept cars of different styles
LAUNCH X431 Idiag Auto Diag Scanner For Android
autoscannertool by autoscannertool @
2015 Tokyo Motor Show has officially had begun, in this show, Nissan has brought new Leaf models. We learned from the scene, the car's maximum mileage up to 280km. It is reported that the car will be officially listed in overseas markets at December this year.
The new Nissan Leaf's basic design has not changed, the body size is also identical to the old models, the difference is that the new car's roof antenna using the new style.
In the interior part of the new Leaf will adopt the new vehicle system, and equipped with 7-inch center control LCD screen, compared to the previous system, increases the navigation system that can display the charge pile location and status, vehicle maintenance reminders and vehicle positioning functions.
In the power, the new Leaf will equipped with motor that the maximum power of 109 horsepower and peak torque of 354 Nm. In addition, the new car also use 30kWh battery pack, the maximum mileage reached 280km, while the older models maximum mileage only 160km.
In test, the new Leaf will still use Nissan Consult3 to diagnosis all the system. Nissan Consult3 Plus is the newest diagnostic tool for Nissan, it is based on a wireless platform provides completed diagnosis and service information.
More related topics
Porsche Macan GTS maximum power 365 hp
2015 Tokyo Motor Show: Mitsubishi eX concept car released
2015 Tokyo Motor Show: Nissan Teatro for Dayz
autoscannertool by autoscannertool @
Recently, we have updated Ktag Master ECU Programmer software to V2.13, and the firmware is V6.07. Comparing KESS V2, Ktag does not support OBD ECU tunning but Ktag covers more vehicles, newly add BMW Gasoline F Chassis and Mercedes W222.
Ktag Master ECU Programmer supports both Car, Motorcycle and Truck ECU Programming, no check error, no token limited. Buy Ktag Master from us will get free ECM TITANIUM V1.61 Drivers. Photo as below:

ECM TITANIUM will make you more easier and accurately to interpret, edit and stored the files inside of the Engine Control Unit (ECU).
Please note when use Ktag V2.13:
1. Better to use the software on WINXP.
2. Please close the internet and don't update the device in any way!!
3. We do not accept dispute if you do not know how to use the ECM TITANIUM V1.61 Drivers.
More related topics
New Mercedes-Benz CLS Shooting Brake with LED headlamps
Nissan Datsun new concept car unveiled end of October
LAUNCH ICARD OBD Code Scanner For Android
autoscannertool by autoscannertool @
Super MB Star 2000 Diagnostic Plus Software (Internet Update) is a popular Mercedes diagnostic tool team for technicians because of its powerful functions,affordable price and internet update software.The MB Star 2000 Diagnostic tool from GO2OBD is in very stable quality and works on both 12V and 24V Mercedes vehicles.

We provide MB Star Diagnostic Tool with software in optional HDD, please see below:
Option 1:HDD for DELL D630/D620/D530
Option 2:HDD for IBM T30.
Option 3:Mobile HDD with software in VMWARE version.
Please let us know what HDD you will need when you order it,thanks.
Key points of this MB Star 2000 Diagnostic Tool with internet updatable software:
1.Very Stable quality MB Star 2000 diagnostic Tool which works on 12V and 24V.
2.Independent DAS let you works on W204 and W221 without inputting password.
3.Internet updatable software.You can use it update it via
4.You will have newest version MB Star software every two months.
5.Software can be used on DELL D630/D620/D530, IBM T30 or Mobile HDD
6.Software in Mobile HDD can works on Winxp/Win7 and Vista.
7.No need to active EPC/WIS any more, double click the Icon then use it
8.New cars of A-Class W176, S-Class W222, GL166, B 246, CLS 218, SLK172, BHARATBENZ, CLC171 etc, released in this version.
9.Online SCN coding and offline SCN coding are all available with this new version(You need to pay additional cost for online SCN Coding).
10.The car PL67 ((01-2013 Version) is added to Benz price list.
11.TV activation.
12.Adjusting truck speed limit.
13.SBC reset.
14.FDOK key calculator(additional cost needed)
15.and so on......

More related topics
Jaguar XJ entertainment system no video output
Newest Delphi DS150E VCI Car & Truck 2 in 1 Scanner
Launch Creader V Obd II Scanner
autoscannertool by autoscannertool @
This is high quality Delphi DS150E NEW VCI plus a set of car cables (total 8 pcs of cables) for old style cars.The software version is R3.2014 which is easy to be installed. It will be your best choice if you need a scanner for brands of cars & trucks.
Highlights of the Latest Delphi DS150E New VCI Car & Truck Scanner Plus a set of car cables.
1.With latest R3.2014 Delphi car & truck diagnostic software.
2.The firmware of the vci can be updated in future for newer software.
3. You can save more from this bulk sales of DS150E NEW VCI + CAR CABLES
4. 8 pcs high quality car cables in one set.
Multi-Language in Delphi diagnostic software: English, Cesky, Dansk, Deutsch, Espanol, Francais, Greek, Hollands, Hungarian, Italiano, Norsk, Polish, Romania,Russian, Srpski, Suomen kieli, Svenska.
Please note: this Delphi Ds150E VCI has NO bluetooth function. Please CLICK HERE to view the one with bluetooth.
More related topics
Nitro OBD2 ECU Chip Remap Tuning Box For Diesel Benzine Car
Lexia 3 With Diagbox 7.76 for Peugeot Citroen Diagnostic tool
Nitro OBD2 ECU Chip Remap Tuning Box For Gasoline Benzine Car
autoscannertool by autoscannertool @
Renault CAN Clip diagnosing & programming tool for Renault cars from 1998-2015, the newest software is V151 provide multiple languages, support ISO and CAN, with full chip PCB always stable quality.
Highlights of Renault CAN Clip Diagnostic Tool with Newest Software
1. Software version: V151
2. Best Can Clip with full chip PCB support ISO and CAN
3. Diagnose Renault cars (1998-2015) including automatically test all Renault models' computers, reprogramming, airbag test and other functions
4. The firmware can be updated in future by newer software, NO 20% block problem
Our Renault CAN Clip Full Chip PCB VS. Others':
Renault Can Clip V151 Software Display:
The firmware can be updated in future by AN2131QC Ez USB Controller, NO 20% block problem, keep the driver and firmware can be updated freely!
Tips on using Renault CAN Clip:
1. Read the installation manual before install software
2. Only fit with Winxp & win7 32 bit system
3. Don't update it on internet
Support languages: English German Brazil Denish Finnish French Italian Norwegian Dutch Portuguese Romania Swish
It's very simple to diagnose a vehicle using Renault CAN Clip Diagnostic Interface: just select the vehicle make, enter the V.I.N. and press ENTER.
More related topics
Nissan X-Trail Car brake system failure
Mercedes-Benz R350 vehicle power system troubleshooting
Toyota Camry hybrid HV2 can not travel
autoscannertool by autoscannertool @
A VOLVO S80L with about Mileage of 6000km. The car at high speed after a period of time, the instrument displays tire pressure monitoring system needs repair.

Fault Diagnosis: This fault is sporadic fault, the vehicle traveling at a low speed, the fault does not appear; after the fault appears, turned off the engine and restarted,  the instrument fault messages will disappear automatically; if not turn off, continue driving about 10 min, the instrument fault messages also will automatically disappear.
Use VOLVO VIDA to diagnosis, fault code stored C 1A60 93- rear wheel tire pressure sensor signal failure in the central electronic module. Measuring each wheel tire pressure, were normal; further checks, found the car did not install any accessories, just give glass posted Solar Films.
Use vida dice diagnosis ID number, tire pressure, tire temperature of each tire pressure sensor, are normal; use the remote control to operate the vehicle, function normally, the receiver works well; remove the receiver to check the part number, is 31,407,101, is latest; measuring receiver power, grounding and LIN signals are normal, and the correlation wire connector no loose, each terminal contact is good; upgrade CEM software and factory test to the tire pressure monitoring system, test passed. Start the engine, in information amusement system to complete set tire pressure (MY CAR → Settings → Vehicle Settings → Tire Pressure settings) then road test, driving about 50 km, the fault does not appear.
After 3 days the fault phenomenon and the fault code as before, that means the last repair does not removed. According to related technologies again to maintenance inspection, measurement and setting, and replace the four tire pressure sensors, re-download the TPMS application software, tore the solar film on the glass. Road test about 150 km, the fault does not appear.
After 2 days fault phenomena and fault code as before. Combined with the last maintenance experience, re-sort maintenance ideas, infer the receiver and the rear wheel tire pressure sensor distance is too far, resulting in receiver receives poor rear wheel tire pressure sensor signal. The car receiver mounted behind on the driver information module (DIM), this car has occurred this failure many times, while the other receiver mounted on the roof of the cars has never been the fault.
Troubleshooting: Extend the receiver wire, take the receiver is transferred to the rear of the roof skylight, reset the tire pressure then test the car, the fault does not appears again.
More related topics
Renault Scenic after adjust timing the engine abnormal sound
Volkswagen ABS system pump trouble fault code exclusion
Mercedes-Benz E300 sedan Parktronic system failure
autoscannertool by autoscannertool @
A 2007 Mercedes-Benz S350, powered by Mercedes-Benz M272 engine, mileage 43 000 km. When driving the car or the engine idling sometimes stalled, and after stalled a period of time, the engine can not start.
Maintenance staff connected to the fuel pressure gauge continued to idling observe the vehicle. After about 30min vehicle automatically turn off again, this time fuel pressure gauge measured fuel pressure is about 50kPa, the value show that fuel  system pressure is too low, the provisions of the fuel pressure is around 1000kPa. Fuel pressure created by the fuel pump, if the fuel pump does not work, the vehicle fuel system can not be established oil pressure. So maintenance staff check fuel pump related lines, not found signs of damage or corrosion, and then query the circuit diagram by workshop information system, turn on the ignition switch and measure the fuel pump connector 1st terminal (ground terminal) and 3rd terminal  (supply-side) between the voltage is 12.2V, standards-compliant, fuel pump relay can be closed normally, it appears that the vehicle has returned to normal at this time.
Maintenance staff through the above diagnostic process analysis, think the direct reason of this failure is fuel pump intermittent not working. May be fuel pump, fuel pump relay intermittent failures, or engine control unit failure. In order to find the point of failure as soon as possible, maintenance staff decided to replace the fuel pump and the fuel pump relay, if after replaced fault cleaned, that means the fault point among the two, otherwise check the engine control unit. After replaced to test, the engine after running 20min at idle speed, again appeared automatic flameout phenomenon, at this time directed at the engine control unit and related lines.
Maintenance staff use Mercedes Star Diagnose connection engine control unit and harness, when the vehicle is turned off failure occurs, measured the voltage between 101 terminal and 113 terminal of diagnosis harness box 050, the result is 0, that mean the circuit have disconnection. In order to find the disconnection point, maintenance staff have also measured the voltage between 101 terminal and 113 terminal and the ground of diagnosis harness box, found the voltage between 113 and the ground is 0, that mean the corresponding engine control unit N3/10 17 terminals and circuit disconnection, through measuring determined the external lines without failure, it can be concluded that the engine control unit internal fault, causing fuel pump relay works abnormal, then leading to the vehicle turn off fault.
After replaced the engine control unit, maintenance staff programmed upgrade the control unit and transport SCN code (control software calibration coding) by mb star c3, finally after repeated test, the fault does not appear.
More related topics
Audi A6L MMI black screen
LAUNCH CR-HD Heavy Duty Code Reader
High Quality Ford/Mazda Incode Tool From Go2obd
autoscannertool by autoscannertool @
Launch X431 Diagun III is a new professional vehicle diagnostic tool designed and developed by LAUNCH for repair technicians. It's smart, easy to carry, fully functional and convenient to use, and it's the standard equipment for garage technicians.
Top 6 Reasons to Get X431 Diagun III:
1. Support full system car diagnosis and up to 70 car models
2. For 12V gasoline and diesel cars
3. Diagnose by DBSscar through Bluetooth
4. Easily update online free for one year,reasonable price
5. Allow  you to print our vehicle fault data with a mini printer
6. Supported Languages: English, French, German, Italian, Japanese, Russian, Spanish, Korean, Simplified Chinese, Traditional Chinese
X431 Diagun III Product Features:
1, Powerful diagnostic functions
2, Wireless diagnosis
3, Fashionable and Integrated design
4, Better battery system design
5, Easy for comparison and analysis
6,Two DataStream waveforms displayed in one screen

X431 Diagun III Functions:
Long stand-By time: Can be used continuously 10 hours.
Unique Appearance: Rolling cover design, the DBScar connector is integrated.
Support print function: Support standard USB printer for printing diagnostic result.
Quick Update: Nearly 1,000 software update per year to ensure the functions.
Wireless diagnosis:  Main unit can communicate with DBScar connector by Bluetooth(<100m).
Powerful diagnostic: Inherited with all diagnosis function of X-431 with wild software coverage, Asian, European and U.S.
This LAUNCH X431 Diagun III 3 can be bought through for 699.00 USD, Save 13% off. We couldn’t find a better price anywhere else.
More related topics
Mercedes Benz MB Star C3 Diagnosis With Newest Software
LAUNCH Creader V Code Reader
Ford-VCM OBD Diagnostic Interface High Quality
1 ... 45678
New Post
feeds Feeds
autoscannertool Marier84 kakrots